Zündapp cylinders and carburettors
Zündapp cylinders and carburettors for maintenance, repair, overhaul and tuning of classic Zündapp mopeds. In this category you will find parts such as a Zündapp cylinder, carburettor, 50cc cylinder, 70cc cylinder, Athena cylinder, 17mm carburettor and intake manifold for Zündapp.
Discover our selection in this category
Zündapp cylinder
A Zündapp cylinder is an important part of the engine. If the old cylinder is worn, damaged or no longer has good compression, you will notice it straight away when starting, accelerating and at top speed. In this category you will find cylinders and related parts for replacement, overhaul and tuning.
When choosing a cylinder for Zündapp, pay attention to the engine type, bore, version and the parts that belong with it. Think of the piston, piston rings, gaskets and carburettor adjustment. Fitting a new cylinder without checking the rest first only means extra wrenching later.
50cc Zündapp cylinder
A 50cc cylinder for Zündapp is often used as a replacement for the standard cylinder. Useful when the old cylinder is worn or when you want to keep the moped running properly with a familiar setup. Always check whether the cylinder fits your engine block and version.
70cc Zündapp cylinder
A 70cc cylinder for Zündapp is usually chosen for tuning. More capacity can give more pulling power and better performance, but only if the rest of the setup works with it. Think of carburettor, jet, exhaust, ignition and cooling. Bolt it on and hope for magic? Sadly, that is not how it works.
Athena Zündapp cylinder
An Athena cylinder for Zündapp is a common choice for replacement or a faster setup. Pay close attention to the version, bore and application. Not every Athena cylinder fits every Zündapp engine block, so comparing remains necessary.
Zündapp carburettor
A Zündapp carburettor provides the right fuel-air mixture. If that mixture is not right, you can get problems with starting, idling, acceleration or running at full throttle. In this category you will find carburettors and parts for maintenance, replacement and adjustment.
A carburettor for Zündapp must match the cylinder, intake manifold, air filter and exhaust. Especially with tuning, correct adjustment matters. The wrong jet or false air through the intake manifold can quickly ruin the whole setup.
17mm Zündapp carburettor
A 17mm carburettor for Zündapp is often used on modified or faster setups. The larger opening can deliver more mixture, but only if the cylinder and exhaust actually need it. Always check the jetting, connection and available space around the engine block.
Zündapp intake manifold
The intake manifold for Zündapp connects the carburettor to the engine block. Diameter, connection and fit must be correct. A wrong or leaking intake manifold can cause false air, poor idling and difficult adjustment. No fun for you, and no fun for your moped either.
Not sure which Zündapp cylinder, carburettor or intake manifold you need?
Parts can differ by engine block, version and year of manufacture. With technical drawings you can see where the parts are located and which part you need, such as a gasket, piston, intake manifold or another part related to the cylinder or carburettor.
View the Zündapp technical drawings.
Other Zündapp parts
Looking for other parts for your Zündapp moped besides cylinders, carburettors and intake manifolds? On the main Zündapp parts page you will find the full overview for maintenance, repair, restoration and tuning.