ECU CDI Vespa Primavera/Sprint/Piaggio Zip IGET euro4 Naraku

Specially developed for your Piaggio/Vespa Euro4 iGet!

your Euro4 Piaggio/Vespa

This Naraku rivet kit is suitable for your Vespa /Piaggio Euro4 iGet scooter. The ECU is easy to change with the original ECU. The ECU is plug and play and does not need to be redeemed. After mounting the rest of the parts that come with the feeding kit, the scooter will have top performance. With the Malossi Multivar, for example, acceleration and top speed can be increased even more. Of course, tuning and adjustment is required for the desired performance.

*With this ECU, the Piaggio/Vespa goes limitless to 50—65 km/h depending on the scooter's adjustment

About the Naraku feeding kit:

- Brand: Naraku

- The kit consists of; ECU, roller set, tension springs, suction rubber and crankcase bolts

- Recognized by Piaggio tester

- Speed is not adjustable

- Assembly instructions included

- For Piaggio /Vespa EURO 4 iGet scooters with the original 50cc cylinder

Using a limiter

It is possible to use a limiter in combination with this ECU. After stepping up the scooter, a limiter can be mounted. This allows you to adjust the scooter at a lower permissible speed and make the scooter ride faster with the top performance at the push of a button. This also keeps the scooter rollerbench proof!

The suction rubber cannot be used on the Piaggio Zip, only on the Vespa Sprint and Primavera.

To get the most out of your scooter, you need to mount the smooth variator bus.