Speed limiter ECU CDI Vespa Primavera/Sprint/Piaggio Zip wireless (adjustable) IGET euro4

The limiter for your Vespa Primavera/Sprint/Piaggio Zip IGET from 2018!

Step things up, but still take it easy on the roller bench?

Well, in principle, that's not natural! But with a speed limiter of Eurolimzer, it does. I'm sure you've heard of it, the Internet is full of it. And that's because they function well. *with this cdi, the Piaggio/Vespa limits any desired speed by means of a set screw (Starting the engine without pressing the remote control or the ignition is switched off and on while driving) *with this cdi, the Piaggio/Vespa goes unbounded 49-53km/h. (ignition on, engine start remote press) About the limiter: - Limitable with the remote control. - Adjustable by means of a set screw - For Vespa Sprint/Primavera/Piaggio Zip I-Get injection 4-stroke 3-valve. Not suitable for other models! Please note! This item is individually tested for its operation before shipment. Item fails if too much force is applied to the potentiometer, be careful it is a potentiometer. Advice use a adjusting screwdriver! The bounded position is activated by starting the engine without pressing the remote control or the contact on and off while driving. Tip: always turn your scooter on and off for the roller bench.

Mounting the limiter

PLEASE NOTE! never put the scooter on contact during assembly then you will get a malfunction and you have to go after the Vespa Dealer. The adjusting screw for the desired speed is under the plug, adjust the speed. Then we advise you to seal the adjusting screw so that it cannot oxidize. -Assembly instructions supplied. (never put the scooter on contact during assembly, you will get a malfunction and you have to go after the Vespa Dealer.) Advice is variator rollers 6.5 grams, and a smooth bus because of this, the Vespa should drive the best and make the least revs. (with this ECU)