Vespa Primavera/Sprint/ Zip wireless limiter (adjustable) IGET Euro4

The limiter for your Vespa Primavera/Sprint/ Zip IGET from 2018!

Ramp things up, but still take it easy on the roller bench?

Well, in principle, that's not natural! But with a Eurolimiter speed limiter, yes. You've probably heard of it, the Internet is full of them. And that's because they work well. *with this cdi, the Piaggio/Vespa limits any desired speed by means of an adjustment screw (Start the engine without pressing a remote control or switch off and on while driving) About the limiter: - Limitable with the remote control. - Adjustable by means of an adjustment screw - For Vespa Sprint/ Primavera/ Zip I-Get 4-stroke 3-valve injection. - Perfect to combine with the Malossi ECU Not suitable for other models! Attention! This item has been individually tested for effectiveness before shipment. Item fails if too much force is applied to the potentiometer, be careful it is a potentiometer. Advice: use a screwdriver! The restricted position is activated by starting the engine without pressing the remote control or switching on and off while driving. Tip: Always turn your scooter on and off in front of the roller bench. -Can be combined with all ECUs, this is only the limiter.

Installation of the limiter

ATTENTION! Never put the scooter on contact during assembly, then you will have a fault and you will have to go to the Vespa Dealer. The adjustment screw for the desired speed is under the plug, adjust the speed. Then we recommend that you seal the adjustment screw so that it cannot oxidize. -Assembly instructions included. (Never put the scooter on contact during assembly, then you will have a fault and you will have to go to the Vespa Dealer.)