CDI GY6 12 inch 45km/h version A quality (original)

About CDIs Let's take a quick look at the topic of CDI. Why should you replace a CDI? There can be a number of reasons for this: - Your scooter suddenly stops in the middle of a ride and does not start again. (electric starter does nothing.) - Your scooter won't start. - You want to return or recharge your scooter. First of all, the difference between the CDI's of two-stroke scooters and those of four-stroke scooters: A CDI has no influence on the top speed of the scooter with a two-stroke. A CDI does have an influence on the top speed of the scooter with a four-stroke. With a four-stroke, a CDI does affect the top speed, but this is not the only factor. The top speed also has to do with things like your variator ring or petrol air adjustment. So, for example, when your scooter runs 60 km/h, it doesn't mean that you can run it 45 km/h again with just replacing the CDI. So always keep that in mind! Assembly and return It is also necessary to connect all the cables of the CDI, these are of course attached for a reason. Otherwise, the CDI will most likely not receive proper nutrition and thus will not work. All CDIs are also new and are tested in the factory for functioning and are only shipped if they are fully functional. So it never happens that a faulty CDI is sent to you. It is also the case that with some scooters the ignition coil and CDI are combined in 1 part, so when these scooters stop, it can be due to 2 parts. On the ignition coil or to the CDI, but because they are combined, both of them will no longer be able to do their job. Attention!! CDIs cannot be returned because it is an electronic product. It is also the case when there is a short circuit in the scooter, that can immediately result in the “blowing up” of the new CDI unit. So always make sure you know which CDI you need! You can always call the assembly helpline for advice, so you can always be sure that you are ordering the right CDI.