Wall / ground anchorPro-tect Art 4 stars

The Pro-tect wall anchor, the best protection against theft!

ART-4 wall anchor

This cheap Pro-tect Art4 wall anchor has a 14 mm thick hardened steel 20 CR alloy collapsible mounting eye. You can attach it to the ground or the wall. In combination with an ART-4 chain lock, this wall anchor is the best protection for your scooter against theft!

Mounting the Pro-tect wall anchor

Mounting this ART-4 wall anchor is quite easy, you cut the mould out of the packaging and place it in the place where you want to attach the wall anchor. You mark the drill holes. You can then drill the 4 holes with a 16mm stone/concrete drill. (The drilling depth is at least 70mm.) You attach the 4 bolts to the base plate. After tightening these bolts, punch the balls into the hex holes with a hammer to prevent loosening. Note: your ground anchor is only approved by insurance after attaching these 4 steel balls! (check with your insurer). You attach the plastic cap with the 3 screws and then attach the plastic caps.

Properties of the Pro-tect Art 4 star wall anchor

• 1 Wall Anchor/Ground Anchor • 1 plastic protective cover • 4 mounting bolts • 1 Allen Wrench • 4 balls • 2 plastic protective caps • 2 bolts for the protective cover • 13.1 cm x 15.8 cm. (including protective cap) Essentials: -1 Drill jig (back of attached manual!) -16 mm stone/concrete drill -Hand drill -Hammer