Gasket set Malossi DEPS4 timing adjustment set MC-Gasket for Piaggio Ciao, Bravo, Si, Boxer with Malossi MP One and DEPS 4 cylinders

all-in-one "timing tuning kit" for the DEPS 4
So it is possible to turn something on the timing screw
without sacrificing compression,

having


to drive
an unnecessarily high
pinch point,
or having to turn off / mill down the head.
By the use of high-quality material & Alloy, which concerns the seal & Pressure characteristics,
it is without further ado possible, e.g. a 0.2mm head gasket to drive
without leakage problems to get

.



The alloys have a better heat dissipation
than the original gaskets with a better pressure resistance
.


Original the following timing is given :

Outlet 182°
Overflow 122,5°
Qk : 0,75/0,80

*To use/clear e.g. the channels/ports completely at BDC,
a foot gasket of 0,4mm would be necessary, but you end up with a QK of
about 1,15 (depending on cylinder & cylinder head tolerance)







.









With the MCGASKET DEPS4 kit it is possible to optimize the timing as you need it
and that with a low pinch point
.


Included in the kit :

1x foot gasket deps4/deps2020 0,40mm Alu

1x


foot gasket deps4/deps2020 0,50mm Alu
1x head gasket deps4/deps2020 0,20mm Copper
1x head gasket deps4/deps2020 0,30mm Copper

It should be noted that the gaskets are very accurately manufactured &






the original,







or rather,







with the original 1 to 1 from the







The dimensions of the gaskets are 1 to 1 the same
as the original gaskets, so it may be necessary
to rework the

holes for the stud bolts.



_{AI-translation}