Headlight led Vespa Sprint
Description
Make your Vespa Sprint unique with this led headlight!
Exclusive LED headlight for the Vespa Sprint
Looking forward to your current original Vespa headlight? Then this Led headlight for the Vespa Sprint is what you are looking for. This LED headlight is not only equipped with a LED projector but also has an extra LED edge. So you are extra visible!Euro4 plug and play
This LED headlight is easy to connect to the standard H4 Power plug of the Vespa Sprint from 2018 Euro4. If you don't figure it out, please call our assembly helpline. Our mechanics are happy to help you further.Mounting on the non-Euro4 models
With the old model (not Euro4), the lighting runs at AC voltage. If you want to mount led headlight, this MUST be DC voltage. This is possible by disconnecting the AC voltage at the control switch dim/high beam (grey wire). Make sure that the cut wire with a heat shrink/insulation tape is insulated with a heat shrink/insulation tape, this to prevent a short circuit. You strip the gray wire that runs to the switch so that another wire can be soldered on it, then pull a wire from the ignition switch upwards. With the ignition lock, this is the white wire (switched plus DC voltage) the wire that you have pulled upwards, you solder firmly onto the wire of the switch, because you insulate it neatly with a heat shrink able/insulation tape. Then your lighting should now light up when you turn on the ignition and you can control it from big to dim with the dim/high beam switch. If everything works, it is of course the most neat when you tap the extra wire in the wiring harness. -If you mount it incorrectly on a Vespa Sprint, the headlight will immediately malfunction, this is not covered by the warranty. If you don't figure it out, please call our mounting helpline. Our mechanics are happy to help you further.Properties of this led headlight:
Material: Aluminun/PC/ LED Modes: high light/low beam /halo ring Housing color: black High/low beam: 30W/50W/10w Voltage: DC 10V-30V Color Temperature: 6000K Luminous Flux: 2100LM Installation instruction not included Only fits the Vespa Sprint
More Information
| Part number | BLA-5808 |
|---|---|
| Brand | Endurance |
Reviews
Fits
Click below on your scooter model to find all compatible parts via our technical drawings.
- Vespa Sprint 50 2T
- Vespa Sprint 50 3V Iget 4T 2018-> Euro 4
- Vespa Sprint 50 4T 2V <-2018 Euro 2 25km/h
- Vespa Sprint 50 4T 3V Iget 2021-> Euro 5
- Vespa Sprint 50 4T <-2018 Euro 2 45km/h


