Complete engine block 139FMB Hanway horizontal AGM Cafe Racer (Luxury)/BTC RAW50/Hanway Raw50 original

In the event of a faulty engine, it is often not unwise to completely replace the engine instead of overhauling it.

When do you replace the 139FMB Hanway horizontal engine block?

If something crashes in your engine block (at higher revs, for example), a lot of things can go wrong.
● Gears jam or break off
● Certain parts no longer receive oil supply, run dry and break
● Bearings break or become trapped
● The above also applies to seals
● Your crankshaft bearings, or one of them, breaks

And so on... What goes wrong at such a bad moment is too much to mention. It often comes down to a huge bill with your mechanic. But what you could also do once you've added up all the costs is maybe buy a completely new engine block! It happens that this is cheaper than replacing everything separately.

Properties of 139FMB Hanway horizontal engine block

● New engine with new parts
● Suitable for replacing the old GY6 139FMB engine block
● Cylinder capacity is 49cc
● Plug and play mounting
● View the images above to see which parts are present on the engine block

Where does this engine fit under?

View the list below of the mopeds that this engine block can be used on. Is your bike not listed or are you unsure whether it is really correct? Then contact our customer service, we are there for you!

Installation: 139FMB Hanway horizontal engine block

Now you would think that this is an impossible job to do yourself, but that's not so bad. You still need to refill the oil in the engine block. It is recommended to change the oil after 500 km to increase the life of the engine. You can then have the standard maintenance sessions take place in accordance with the workshop manual for your type of scooter.