Lifting kit/limiter GY6 + remote control 25-45km/h Euro 4/5

You can easily lift your GY6 Euro4 or Euro5 scooter with this converter/limiter.

Lifting kit/limiter GY6 + remote control 25-45km/h Euro 4/5

All Chinese scooters from year of manufacture 2018 are equipped with an ECU. With this play and play limiter, your scooter not only goes faster, but you can also limit the scooter again at the touch of a button. The ecu is the “brain” of the scooter and this converter unlimits the ecu, increasing the speed. The limiter can be used for Chinese 50cc Euro4 or Euro5 scooters with year of construction 2018 or later. It can be used on scooters with a Dell'Orto ECU, Delphi ECU and Rongmao ECU.

Mounting lifting kit/ limiter GY6 + remote control AGM/ BTC/ ZNEN 25-45km/h EURO 4 and EURO 5

Assembly is easy. You keep the original ecu and insert the converter and any adapter cable. There is no need to learn.
- For scooters with Dell'Orto ECU, it is plug and play with disconnecting the old speed converter and inserting this speed converter.
- For scooters with Delphi ECU, it is plug and play with the included 4-pin cable. You connect this cable to the readout plug of the scooter.
- For scooters with Rongmao ECU, there are 2 adapter cable, 1 with an OBD2 plug connection and 1 with a rectangular connection. 1 of both cables can be connected directly to the readout plug.

Attention! Cannot be used on scooter whose ECU has been rewritten, so if the scooter has already been stepped up. Only applicable to 25km/h models.

The smooth variator bus is not included! It needs to be replaced by a smooth bus to get the right experience from this limiter. You can find the slippery bus below.

For the BTC Felice Euro5, this limiter is not suitable.