Black spray paint 500ml Motip

Product description
High-quality, quick-drying primer for pre-treating treated and untreated surfaces made of wood, metal, aluminum, glass, stone, eternite and pottery.
Suitable primer as a pre-treatment before finishing with alkyd resin, nitro-cellulose, 1-K acrylic and 2-K acrylic paints.

Product features
Quick-drying
Very high deck and fill power
Good corrosion resistance
Good sanding, both wet and dry (from 400 grit)
Can be sprayed with all paint systems

Physical and Chemical Properties
VOC content: Approximately 85% w/w
Solid: Approximately 15% w/w
Dust dry: After 5 to 10 minutes
Non-stick: After 10 to 20 minutes

Operating instructions

Read and follow the instructions on the packaging carefully before use.

Pretreatment
The surface must be clean, dry and free of grease. Remove loose old paint and rust, then sand.

Treating
The surface must be clean, dry and free of grease. Bring the spray can to room temperature. Ideal treatment temperature 15 to 25°C. Shake the spray can thoroughly for 2 minutes and spray a sample before use. Distance to the surface to be treated approximately 25 to 30 centimetres. Apply the primer in several thin layers. Shake the spray can again before applying the next coat. After use, clean the valve (keep the spray can upside down and spray head for about 5 seconds).
hold down).


The drying time depends on the ambient temperature, the humidity and the layer thickness applied.