Heated handle, heated scooter/engine grips 120mm Koso

Properties: Heated handle, heated scooter/engine handles, 120mm, Koso

• Only suitable for wheels with a thickness of 22mm (90% of scooters have a wheel thickness of 22MM)
• The length of the handles is 120 millimeters and cannot be cut to size
• The heat can be adjusted variably with a dial
• Optimal grip, comfortable rubber grips
• Suitable for scooters and motorbikes
• Equipped with a fuse in the wiring harness to reduce or prevent damage to the scooter
• Draws a maximum of 2.8 Amps from your battery
• The warm-up time is between 10 and 30 minutes.
• Supplied with assembly instructions!

Comes with end caps so you can seal the hole on the side of the steering wheel

What do you need to know before ordering this 120mm Koso scooter/motor handle heater?

You need to know what the wheel thickness is without the handle. This is easy to determine by using a brake brake brake caliper. You also need to know the length of the handle that is currently on your scooter or motorcycle, i.e. measure it with a brake brake brake caliper, ruler or tape measure. It's about the length, size, from the beginning to the end of the handle.

Assembly: Heated handle, heated grips, scooter/engine, 120mm, Koso

Installing the Heated Handle Heater, Scooter/Motor Handles 120mm Koso is easy with the included assembly instructions. The option is to order the mounting kit with connection materials, so that you are fully provided with all the necessary materials for a good connection.