When does a cylinder need to be replaced?
For example, a cylinder of SP is an essential part of your Vespa Ciao. A cylinder is in need of replacement when there is a scratch or bumper in the wall, so the Vespa Ciao cylinder loses compression. Compression is the compression of the fuel/air mixture in the cylinder. With no or hardly any compression, the engine of your Vespa Ciao will no longer start or run badly. A scratch or bumper is a palpable unevenness in the cylinder wall. As a result, if you replace only the piston; this new piston can also immediately damage your Vespa Ciao! If a Vespa Ciao is poorly adjusted or has too little oil, the wear and tear of your SP 50 cc cylinder is a lot greater.
Assembly A.c SP 50 cc 2-stroke Vespa Ciao cylinder
Mounting an SP cylinder from a Vespa Ciao is not difficult. Please note that the piston is properly mounted (arrow to the exhaust port) The best thing for the SP cylinder is that is run in quietly for 500 km. Do you have any questions about the assembly of this cylinder? Please contact the assembly guide. We are happy to help you!
In stock, shipped within 24 hours!
SKU
3969
€29.13
- Pay after delivery
- Customers rate Zandri with a 9.4 score
- More than 100.000 parts in the assortment
Details
If you are looking for a standard cylinder for your Vespa Ciao then this SP cylinder is suitable for this!
• Size: 38.2 mm
• 50 cc engine capacity
• Material: cast iron
• Air-cooled A.c
• Piston pin 10 mm
This cylinder comes with a piston. You can mount the original cylinder head on this cylinder.
SP parts are seen as replacements, no tuning stuff! Cylinders are available from SP for almost every type of scooter. You can also order SP carburetors and crankshafts from Zandri. SP is the own brand of Zandri and from SP there are motor parts available for the scooter and moped. SP parts are cheap and of reasonable quality. SP stands for “Standard Parts”
Are you unsure whether this cylinder fits your scooter? Watch “fits” below
Lep on this cylinder does not fit the crankcase of the following models:
Vespa Ciao mix 25 km/h
Gilera Citta new model (with electronic ignition)
Vespa Ciao new model 25 km/h
Vespa SI MIX 25 km/h
Properties SP Vespa Ciao 50 cc cylinder
• Size: 38.2 mm
• 50 cc engine capacity
• Material: cast iron
• Air-cooled A.c
• Piston pin 10 mm
This cylinder comes with a piston. You can mount the original cylinder head on this cylinder.
SP
SP parts are seen as replacements, no tuning stuff! Cylinders are available from SP for almost every type of scooter. You can also order SP carburetors and crankshafts from Zandri. SP is the own brand of Zandri and from SP there are motor parts available for the scooter and moped. SP parts are cheap and of reasonable quality. SP stands for “Standard Parts”
Are you unsure whether this cylinder fits your scooter? Watch “fits” below
Lep on this cylinder does not fit the crankcase of the following models:
Vespa Ciao mix 25 km/h
Gilera Citta new model (with electronic ignition)
Vespa Ciao new model 25 km/h
Vespa SI MIX 25 km/h
More Information
SKU | 3969 |
---|---|
EAN-13-code | 7421083730203 |
Brand | SP |
Cylinder capacity | 50cc |
Cylinder bore | 38.2mm |
Material | Cast iron |
Cooling | Air cooled (AC) |
Piston pin diameter | 10mm |
Engine technology | 2-stroke |
Gasket set included | No |
Reviews
Fit's on
Click on your scooter model for all list of all the parts.
More Choices: